Beckhoff Automation announces CX7000 Embedded PC as PC-based controller

 Beckhoff Automation announces CX7000 Embedded PC as PC-based controller 

  Beckhoff Automation announces CX7000 Embedded PC as PC-based controller

6. December 2018 - The CX7000 Embedded PC from Beckhoff opens up the TwinCAT 3 software environment for DIN rail-mounted controllers. This improves the scalability of Beckhoff's PC-based control technology - from mini PLCs to industrial PCs with many cores. A 400 MHz processor and built-in configurable I / Os drive this embedded PC.

Equipped with an ARM Cortex-M7 processor (32 bit, 400 MHz), the CX7000 Embedded PC, measuring 49 x 100 x 72 mm, provides the scalability of PC-based control for small controller applications, which are usually require a minimum of space.

With built-in multifunctional I / O channels, the CX7000 provides a value:

  • Eight Digital Inputs, 24V DC, 3ms Filter Type 3
  • Four Digital Outputs, 24V DC, 0.5A , 1-wire technology

These integrated multifunctional I / Os can be configured for other operating modes via TwinCAT 3, including the possibility of rapid use Counting or processing analog values:

  • Counter mode: 1 x 100 kHz digital counter input, 1 x digital input as up / down counter, 2 x digital counter outputs
  • Incremental encoder mode: 2 x digital inputs for 100 kHz encoder signal, 2 x digital encoder outputs
  • Analog signal mode: 2 x digital inputs configured as analog inputs 0 ... 10 V, 12 Bit
  • PWM signal mode: 2 x digital outputs configured for PWM signal

If additional electrical signal types need to be processed, the CX7000 can If desired, by simply adding EtherCAT Terminals or Bus Terminals to the integrated I / Os. Additional I / O terminals can be connected directly to the CX7000.

The Embedded PC is equipped with 512 MB MicroSD flash memory (with the option to upgrade to 1, 2, 4 or 8 GB) and is suitable for operating temperatures between -25 and +60 ° C. It serves as a programming interface an Ethernet interface (10/100 Mbit / s, RJ45). This means that the CX7000 can be ideally used as a stand-alone compact controller. In the CX7080 version, peripheral devices such as displays, scanners or weighing systems can be connected via an additional serial interface (RS232 / RS485).

2018-12-07 01:48:50
we are supplier of ABB,endress hauser,MTL Intrinsic Safety Eaton MTL,Pepperl+Fuchs International. Industrial Sensors, Factory Automation ,P+F ,SMAR – Industrial Automation
for get this brands items please send us your inquiries as following link

Please send us your request with full details via the following link to supply your equipment in the fields of power, instrumentation and industrial computers. We will try to respond to you as soon as possible.

Click to Send inquiry to Ocean Part

More Products  ASM introduces the POSIROT PMIS4 / PMIR7 incremental encoder solution

Leave a Reply