Optimal Engineering Systems publishes AU300-AER three-axis gimbal suspension

please send your inquiries to us

Contact Us

  Optimal Engineering Systems Introduces Three-Axis Gimbal Mount AU300-AER

28. June 2018 – OES's AU300-AER three-axis gimbal mount (Optimal Engineering Systems, Inc.) has 360-degree rotation of each axis. This three-axis gimbal can accommodate loads up to 10 kg (22.5 lbs) and has a pitch of 300 mm x 300 mm (11.8 in. X 11.8 in.) Around the roller axle table. The azimuth stage turntable is mounted on a large 360 ​​mm (14 173 in.) X 360 mm (14 173 in.) X 13 mm (0.512 in.) Plate with handles and has pre-drilled mounting holes for integration into new or existing applications , and for increased stability. The AU300-AER three-axis gimbal is suitable for mounting cameras, optics, lasers and instruments for scanning, tracking, positioning, aiming and other applications.

The 3 axes: Azimuth, elevation and roll axes are driven by bidirectional stepper motors that can perform microsteps and manual adjustment buttons. The roller axle table measures 100 mm (3,937 in.) In diameter. The buttons can be replaced with optical encoders for position testing and closed loop positioning. Each axle features: worm gear and precision V-groove and cross roller bearings for a 3.6 arc second resolution and repeatability and position accuracy up to 36 arc seconds. The driving speed of each axle is 8 O per second. The electrical connections are made via three 9-pin DB-9 plugs.

The AU300-AER motorized triaxial gimbal can be ordered as a complete plug-and-play system with multi-axis control, joystick and trackball or keypad and with a 30mm through hole in the rolling stage.

More Products  Safe and Reliable: Is Your Smart Factory Safe?

Leave a Reply