Proline t-mass A 150 Thermal mass flowmeter

Thermal mass flowmeter - Proline t-mass A 150

The flowmeter for cost-effective measurement and easy monitoring of utility gases

The t-mass A 150 inline device is specially designed for the cost-effective measurement of utility gases, in particular compressed air. It is a trending device aimed at sub-metering applications. its 4-wire technology is contained within a rugged compact aluminum housing. It is orderable either with display or as a blind version. Customer-specific settings are saved on the display and can be transferred from one device to another by means of the display.

t-mass A 150, 6AAB15, DN15 1/2″

t-mass A 150, 6AAB25, DN25 1″

t-mass A 150, 6AAB40, DN40 1 1/2″

t-mass A 150, 6AAB50, DN50 2″
Benefits

Suitable for air, nitrogen, carbon dioxide and argon in small line sizes
Optimal process monitoring – easy measurement even at low pressures and flow velocities
Cost-effective measurement – easy installation, negligible pressure loss and maintenance-free
Reliable flow trending – multivariable measurement
Fast and efficient commissioning – guided operating menus
High plant availability – self-diagnostics and error monitoring
Automatic recovery of data for servicing
Field of application

Measuring principle is characterized by a high operable flow range and direct mass flow measurement
Suitable for air, nitrogen, carbon dioxide and argon in small line sizes.

Device properties
Inline version: nominal diameter DN 15 to 50 (1/2 to 2″)
Process pressure up to PN 40, Class 300
A variety of process connections available
Device in compact version with DC 24 V power supply
4-20 mA HART, pulse/frequency/switch output
Compact and robust transmitter
Features and specifications

Gas
Measuring Principle Thermal
Product headline The flowmeter for cost‐effective measurement and easy monitoring of utility gases. Suitable for air, nitrogen, carbon dioxide and argon in small line sizes.
Sensor features Optimal process monitoring – easy measurement even at low pressures and flow velocities. Costeffective measurement – easy installation, negligible pressure loss and maintenance‐free. Reliable flow trending – multivariable measurement. Inline version: nominal diameter DN 15 to 50 (½ to 2″).
Process pressure up to PN 40, Class 300.
Transmitter features Fast and efficient commissioning – guided operating menus. High plant availability – self‐diagnostics and error monitoring. Automatic recovery of data for servicing. Device in compact version with DC 24 V power supply. 4‐20 mA HART, pulse/frequency/switch output.
Nominal diameter range DN 15 to 50 (½ to 2″)
Wetted materials Transducer: 1.4404 (316L)
Insertion tube: 1.4404 (316L)
Measuring tube: 1.4404 (316L); 1.4435 (316L)
Connection: 1.4404 (F316/F316L); 1.4404 (316L); 1.4435 (316L)
Measured variables Mass flow, temperature, corrected volume flow, FAD volume flow
Max. measured error 3 % o.r.
4 % o.r.
5 % o.f.s.
(depending on chosen option of ordering feature “Calibration flow”)
Measuring range 0.5 to 910 kg/h (1.1 to 2002 lb/h)
0.5 to 1365 kg/h (1.1 to 3003 lb/h)
(for air, depending on chosen option of ordering feature “Calibration flow”)
Max. process pressure PN 40, Class 300
Medium temperature range –40 to +100 °C (–40 to +212 °F)
Ambient temperature range –40 to +60 °C (–40 to +140 °F)
Transmitter housing material AlSi10Mg, coated
Degree of protection IP66/67, type 4X enclosure
Display/Operation 4‐line display with push Buttons
Configuration via local display and operating tools possible
Outputs 4‐20 mA HART (active)
Pulse/frequency/switch output (passive)
Inputs Status input
Digital communication HART
Power supply DC 18 to 30 V
Hazardous area approvals ATEX, IECEx, cCSAus
Metrological approvals and certificates Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR
Pressure approvals and certificates PED, CRN

More Products  FCI announces an enhanced version of the ST50 mass flowmeter series

All Spare parts
Terminals
Electronic
Display
Cover
Connection (electrical)
Sealing
Housing/housing accessories
further parts
All Spare parts
show additional texts
Nr Order code Specification
37 71158893 Kit 10 terminal block, 8-pin,t-mass 150
30 XPD0006-

Electronic t-mass A/B 150
Approval:
AA Non-hazardous area
BS ATEX II3G Ex nA IIC
C4 CSA C/US NI Cl.I Div.2 Gr. ABCD
I5 IECEx Z2 Ex nA IIC
Power Supply:
D 18-30VDC
Output; Input:
A 4-20mA HART
B 4-20mA HART, pulse/freq./switch output
K Pulse/freq./switch output
>Firmware Version:
78 01.00.zz, HART, DevRev01
40 XPD0024-

Display module, SD02, push buttons
For Product:
A 5X2B**-,6XAB**-,7X2B**-,7X2C**-, 8X2B**-,8X2C**-,9B2B**-, FMP5X-, FMR5X-, FMR6X, FHX50-
Display; Operation:
C SD02 4-line; push buttons + data backup function
Revision number:
00 Not used
20 71158894 Kit cover Alu, sight glass, gasket
20 71158895 Kit cover Alu, blind version, gasket
15 50103658 Kit 10 cable glands M20x1,5 grey
15 50098036 Kit 10 cable glands M20x1.5 Ex
15 50098041 Kit 10 ext. M20x1.5/G 1/2″ (plug PVC)
15 71115505 Kit 10 ext. M20x1,5/G 1/2″ (plug brass)
15 50098042 Kit 10 ext. M20x1.5/NPT 1/2″ (plug PVC)
15 71115509 Kit 10 ext. M20x1,5/NPT1/2″(plug brass)
15 71240315 Kit socket, M20x1,5/M12x1, NBR
15 71240316 Kit plug, M20x1,5/M12x1, NBR
65 71158896 Kit housing gaskets, t-mass 150
19 71158897 Kit housing parts, t-mass 150

71240320 Kit weather protec.cover, t-mass 150

DK6ST-

Plate flow conditioner 19 hole
Pipe Diameter:
40 DN40 1-1/2″
50 DN50 2″
Process Connection:
9 Special version, TSP-no. to be spec.
E PN40, flange EN1092-1-B1 (DIN2501)
M Cl.300 RF Sch.40, flange ANSI B16.5
Material:
0 316L/1.4404
1 316L/1.4404 + material certificate
9 Special version, TSP-no. to be spec.

More Products  Proline Promass Q 500 Coriolis flowmeter

XPRFID-

Spare RFID TAG
Approval:
AA Non-hazardous area
BA ATEX
CA CSA
IA IEC Ex
Identification:
1 Serial number entry

Thermal mass flowmeter Proline t-mass A 150 | Endress+Hauser
Proline t-mass A 150
Proline t-mass B 150
Proline t-mass 150 Cost-effective flowmeter for utility
Proline t-mass 150 Flowmeter For Utility Gases

Please send us your request with full details via the following link to supply your equipment in the fields of power, instrumentation and industrial computers. We will try to respond to you as soon as possible.

Click to Send inquiry to Ocean Part

Leave a Reply